You need a reliable nitrogen supply solution which matches the requirements of your industrial nitrogen application and also fits in the available installation room at your site?

Then the membrane nitrogen generators from NOXERIOR, turn-key-installed on a painted carbon steel skid, will be the perfect solution for you.

Advantages of Membrane Nitrogen Generators from NOXERIOR

Proven quality & reliability

Superior efficiency

No need for external feed air receiver and feed air dryer

High level of customisation

Technical Specifications of NOXERIOR Membrane Nitrogen Generators

Membrane nitrogen generators from NOXERIOR will include all necessary system components and controls to start nitrogen production by a simple push-button:

Cyclone separator for bulk condensate removal from incoming feed air

Feed air filtration, including an activated carbon tower in case of feed air supply by oil-lubricated air compressors

Moisture analyser (optional)

Electrical feed air heater with thyristor capacity control

Automatic off-spec feed air blow-off

Set of hollow-fibre membrane modules

Nitrogen flow control

Residual oxygen analyser,

Thermal nitrogen mass flow meter (optional)

Automatic off-spec nitrogen blow-off

Local pressure and temperature transmitters

PLC based control system with IP/Ethernet connection for fully automatic and unattended operation on a 24/7 operating basis

Automatic purity adjustment between 5,0 and 0,5 vol.% of residual oxygen

All pressure vessels designed and certified to EN 13445 and 97/23/CE (PED)

On request, NOXERIOR can also supply you an electric-motor driven air compressor for the required feed air supply. Depending on its size , the air compressor will be either integrated on the skid or supplied separately. A separated feed air receiver or separate air dryer are not required for membrane nitrogen generators from NOXERIOR.

 

Special Features

Double purity option for simultaneous production of two product flow rates with different nitrogen purities;

Pressure vessels designed and certified to ASME, AS1210, GOST-R / GOST-K or any other specific standard required for your operating location

Electrical system to CSA, UL, AS3000 or any other specific standard required for your operating location